无极3无极3注册官网

categories of news

Product Categories

contact us

Lumu Qiyuxin Longbang Coating Co., Ltd.

Free consultation hotline: 400-6785-119

Phone: 0991-3750189

Mobile phone: 15099105069

Fax: 0991-3729572

Address: No. 46, Jinsha Fourth Lane, Xuanrendun First Team, Xinshi District, Urumqi

Website: haoyi007.com


company news

Your current location : Home >> News >> Company News
  • Construction spraying method of Xinjiang steel structure fireproof coating

    1. The paint mix and Xinjiang steel structure fireproof paint configuration and mixing should be used at the same time. The paint must be used within the time specified in the specification. Mix evenly, uniformly, and with moderate consistency, which can not only flow smoothly in the tube, but also not flow and fall off after spraying. Second, the grass-roots treatment: completely remove the dirt, grease and rust steel construction
    Release time: 2019-11-21 Clicks: 4

  • Grades of Xinjiang fire-resistant materials

    Have a deep understanding of various products produced by manufacturers of fire-resistant materials. 1. The grades of Xinjiang fire-resistant materials are generally five grades. So, what are its specifics? The reason is: Class A: It has very good non-combustibility, hardly burning or spontaneous combustion. Class A1: Non-combustible and does not open fire. A2: Non-combustible, but better than A1
    Release time: 2019-01-21 Clicks: 27

  • Xinjiang steel structure fireproof coating ultra-thin structure fireproof coating

    Xinjiang steel structure fire-resistant coating ultra-thin structure fire-resistant coating Ultra-thin steel structure fire-resistant coating refers to the thickness of the coating within 3mm (including 3mm), the decorative effect is good, can expand and foam at high temperatures, the fire resistance of steel structures generally within 2h Fire-resistant paint. Fire protection of this type of steel structure
    Release time: 2018-08-06 Clicks: 59

  • Xinjiang fireproof coating is applied on the surface of the substrate

    Xinjiang fire-resistant coating is applied on the surface of the substrate. In addition to its flame retardant effect, it also has anti-rust, waterproof, anti-corrosion, abrasion resistance, heat resistance, and toughness, coloring, adhesion, easy-drying, and certain properties. Gloss and other properties. Burning of fire-resistant coatings for steel structures is a rapid and violent oxidation reaction with flames. The reaction is very complicated. The generation and progress of combustion must be simultaneous
    Release time: 2018-07-02 Clicks: 60

  • Two main properties of Xinjiang steel structure fireproof coatings

    Xinjiang steel structure fireproof coating not only can play a certain role in anticorrosion, but also can effectively prevent fire. Maybe you have some doubts about this kind of material, but in practice, this coating has obtained effective results. Xinjiang The anticorrosiveness of steel structure fireproof coatings,
    Release time: 2018-06-25 Clicks: 56

  • What are the fire protection materials needed in Xinjiang during fire acceptance?

    It can be said that Xinjiang fireproof materials can be used regardless of whether it is from the company to the individual, and it is also a necessary thing. Then what are the fireproof materials required for Xinjiang fireproof acceptance: 1. A copy of the steel structure fireproof coating construction contract (plus The official seal of the construction unit). 2. Witness sampling notice for building materials and fire protection products (issued by the local fire control unit)
    Release time: 2018-06-19 Clicks: 72

  • How to ensure the fire resistance of Xinjiang steel structure fireproof coatings

    Xinjiang steel structure fireproof coating is a widely used product in the building materials market recently. It is necessary to carry out related operations according to the requirements of the instructions. This is also to ensure that the product can ensure sufficient safety during use. Can ensure the fire resistance of Xinjiang steel structure fireproof coatings. 1.The bonding strength of fireproof coatings for steel structures should meet relevant regulations
    Release time: 2018-06-11 Hits: 56

  • Acceptance of Xinjiang fireproof coatings after construction

    Acceptance after construction of Xinjiang fireproof coatings 1) The base layer should be free of pollution such as dust, sand, oil, etc. The coating of the waterproof coating should be complete and free from defects such as missing coating, miscoating, hollow drums, embossing, pitting, powdering, etc. 2) Xinjiang's fire-resistant coating construction should not have a surface crack greater than 0 after hardening of the thick-type fire-resistant coating layer.
    Release time: 2018-06-04 Clicks: 48

  • Application of Organic Blocking Materials in Xinjiang Fireproof Materials

    As for the organic plugging materials in Xinjiang fire-proof materials, everyone may not be very familiar with them in terms of their composition and use. Therefore, the following will explain the knowledge in this area, so that everyone can learn about them. Awareness and understanding, in this way, can make progress in the product of fireproof materials. What is organic plugging? Which is mainly caused by
    Release time: 2018-05-28 Clicks: 54

  • Mistakes in the selection of Xinjiang steel structure fireproof coatings

    Mistakes in the selection of Xinjiang steel structure fireproof coatings: The performance requirements of fireproof coatings differ in different materials and materials in steel structures, so you can ask relevant professionals when choosing coatings, and use suitable fireproof coatings in suitable places. Play the best fire prevention effect. error
    Release time: 2018-05-21 Clicks: 32

A total of 142 10 Articles per page Pages: 1/15
2 3 4 5 6 7 8 9 10 下一页 尾页 1 2 3 4 5 6 7 8 9 10 Next Last

New Public Network Security No.65010402000504

腾讯分分彩龙虎和哪个平台可以玩 怎么才可以做河内五分彩代理 鸿运棋牌官网 好牛娱乐网 远华亚洲无极3无极3注册官网 五星棋牌体现 游戏厅电玩 手机挣钱的方法 速发彩票在线客服 数亿2娱乐平台注册开户登录